Start by installing the tungsten bead on your hook; Tie in wire at position of hookt hat is slightly curved; Make 2 or 3 tight clockwise wraps with wire; Make small thread bump; Tie in 3 tail fibers two thirds in length of hook shank; Fibers should be equal in length and in spread position
Continue with wire wrapping tightly in clockwise direction stopping at point on hook shank (leaving room for petite glassbead to sit on top of hook shank between tungsten bead and wire wraps).
Glass Bead Installation - Take a length of white Super floss and divide it in half; Install floss through hole in glass bead; Secure floss ends on top of hook shank behind bead head (making 7-10 firm wraps with thread, firmly pulling forward on floss tag ends allowing glass bead to position forward and helping to align properly; Make several more securing wraps with thread stretch floss.
Select one natural peacock eye fiber (pay close attention when choosing correct size); A #16 Sin City should be tied with a natural peacock fiber that is closer to the eye; A #12 Sin City should be tied with a larger natural peacock eye fiber; Tie in natural peacock eye fiber behind glass bead; Make 2 or 3 wraps with peacock behind glass bead; Wrap forward making 3 wraps in front of glass bead; Tie down at this point with thread but do not cut peacock tags yet.
Tie in 2 sections of midge flash (one on each side); When tied in each section will create two legs per side; Cut to length; Trailing legs should be shorter than the front legs or approximately 2/3rd's the length of the hook shank; Take remaing peacock and make two more wraps behind bead head and whip finish.
